毫米波三维异质异构集成技术的进展与应用

三维异质异构集成技术是实现电子信息系统向着微型化、高效能、高整合、低功耗及低成本方向发展的最重要方法,也是决定信息化平台中微电子和微纳系统领域未来发展的一项核心高技术。文章详细介绍了毫米波频段三维异质异构集成技术的优势、近年来的发展趋势以及面临的挑战。利用硅基MEMS 光敏复合薄膜多层布线工艺可实现异质芯片的低损耗互连,同时三维集成高性能封装滤波器、高辐射效率封装天线等无源元件,还能很好地处理布线间的电磁兼容和芯片间的屏蔽问题。最后介绍了一款新型毫米波三维异质异构集成雷达及其在远距离生命体征探测方面的应用。     

Preparation and characterization study on maleic acid cross-linked poly(vinyl alcohol)/chitin/nanocellulose composites

In the quest on improving composite formulations for environmental sustainability, maleic acid (MA) cross-linked poly(vinyl alcohol) (PVA)-α-chitin composites reinforced by oil palm empty fruit bunch fibers (OPEFB)-derived nanocellulose crystals (NCC) had been successfully prepared. Based on the Fourier transform infrared (FTIR) spectroscopic analysis, it was proven that molecular interactions of the cross-linker to the polymeric networks was through conjugated ester linkage. Differential scanning calorimetry (DSC) showed that the influence of MA was minimal toward crystallization in the PVA/chitin/NCC composite. Maximum tensile strength, elongation at break and Young's modulus of the respective PVA/chitin/NCC composites were achieved at different content of MA, dependent on the PVA/chitin mass ratio. Among all compositions, a maximum Young's modulus was achieved at 30 wt% MA loading in PVA/chitin-30/NCC, amounting to 2,413.81 ± 167.36 MPa. Moreover, the mechanical properties and selected physicochemical properties (swelling, gel content, and contact angle) of the PVA/chitin/NCC composites could be tailored by varying the chitin content (10–30 wt%) and MA content (10–50 wt% based on total mass of composite). In brief, this chemically cross-linked PVA-based biocomposites formulated with sustainable resources exhibited tunable physicochemical and mechanical properties.     

Preparation of poly(methyl methacrylate-co-ethylene glycol dimethacrylate-co-glycidyl methacrylate) walled thermochromic microcapsules and their application to cotton fabrics

This study focused on fabrication of the thermochromic microcapsules and their application to the cotton fabric. In this study, thermochromic systems composed of crystal violet lactone, bisphenol A, and 1-tetradecanol were prepared and microencapsulated by emulsion polymerization method in poly(methyl methacrylate-co-ethylene glycol dimethacrylate-co-glycidyl methacrylate) wall. The microcapsules were analyzed by Fourier transform infrared spectroscopy, scanning electron microscope, transmission electron microscope, differential scanning calorimetry, and thermogravimetric analysis. Their thermoregulating property was tested by T-history test. The results revealed that microcapsules with smooth surfaces, core–shell structured, and spherical shape were successfully produced. The latent heat storage capacity of the microcapsules decreased from 202 J g⁻¹ to 167 J g⁻¹ when their shell/core ratio changed from 0.5/1 to 2/1. Microcapsules were adequately had sufficient thermal resistance to the temperatures they will encounter during their application to textile products and their usage. According to the UV–visible spectroscopy analysis and color measurements, the microcapsules exhibited reversible color change from blue to colorless and vice versa. Besides, the microcapsule impregnated fabric was able to absorb latent heat energy of 21.79 J g⁻¹ at around 35 °C and had cooling effect. According to the colorimetric parameters, the fabric was at blue color at room temperature and became colorless when heated to the temperature above the melting point of thermochromic system. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48815.     

Yellow resistant photosensitive resin for digital light processing 3D printing

Digital light processing (DLP) has been studied and developed in the field of three-dimensional (3D) printing in recent years due to its fast curing rate and high resolution. To reduce the cost and viscosity of the resin system, the aromatic polyurethane acrylates (PUAs) were used as oligomer. The matrix resin called PUH₂ consists of oligomers (PUA, bisphenol A polyoxyethylene ether dimethyl acrylate) and active diluents (hydroxyethyl acrylate, hydroxyethyl methacrylate). However, the photosensitive resin containing aromatic isocyanate groups was easily yellowed under ultraviolet light. In this article, we developed a resin for DLP 3D printing with yellowing resistance, excellent mechanical properties and high heat resistance. The optimal ratio of 3DP-PUH₂ resin was PUH₂/TPO/RYOJI-292/dye/nanosilica = 100/5/0.4/0.01/0.1, and its viscosity was 500 cp, which is suitable for DLP 3D printing. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48369.     

Synchronous fluorescence and multivariate classification analysis as a screening tool for determining Sudan I dye in culinary spices

Spices are a globally traded commodity which has been found to be adulterated with forbidden Sudan dyes. This work proposes a screening method for determining the adulteration of paprika varieties (mild, hot and smoked) with Sudan I dye, based on constant-wavelength synchronous fluorescence spectroscopy with multivariate classification. Different wavelength-intervals (Δλ) were evaluated. Classification models were built with Partial Least Squares-Discriminant Analysis (PLS-DA) at two Sudan I dye concentration levels (1 and 5 mg L⁻¹) and they were tested with samples at a lower level (0.5 mg L⁻¹). Classification results were quite satisfactory when a strategy based on first-derivative spectra was used for improving classification results. Δλ = 60 nm was chosen as the optimum wavelength interval giving a 100% of sensitivity and specificity. These results are promising because the risk of assigning adulterated samples as safe to be consumed is highly minimized. The proposed method is feasible, rapid and simple taking advantage of Sudan I fluorescence phenomena in a direct way.     

DyCrxFe(1-x)O3 nanoparticles prepared by wet chemical technique for photocatalytic applications

DyCr_xFe_(1-x)O₃ (0 ≤ x ≥ 0.4) nanoparticles were prepared using facile chemical route. Structural and morphological evaluation was carried out using X-ray diffraction (XRD) and electron microscopy. Formation of orthorhombic DyFeO₃ nanoparticles was confirmed by XRD with crystallite size of 9–10 nm. FESEM images revealed nearly spherical morphology of the fabricated nanoparticles. Energy dispersive X-ray (EDX) technique was employed to confirm the presence of Dy, Cr, Fe and O elements in DyCr_xFe_(1-x)O₃ nanoparticles. FTIR studies illustrated the presence of characteristics stretching and bending vibrations. UV–visible spectroscopy was used to analyze the photocatalytic performance of the DyFeO₃ and Cr-substituted DyFeO₃ nanoparticles and optical band gap measurements. Photocatalytic activities of the prepared substituted and un-substituted DyFeO₃ nanoparticles were conducted using three different dyes. These dyes were (i) methyl orange, (ii) rhodamine B and (iii) methylene blue. Lower band gap and higher photocatalytic performance was observed for Cr-substituted DyFeO₃ nanoparticles with methylene blue dye.     

Highly efficient photocatalytic treatment of mixed dyes wastewater via visible-light-driven AgI–Ag3PO4/MWCNTs

A high-performance photocatalyst of AgI–Ag₃PO₄/multi-walled carbon nanotubes (MWCNTs) was fabricated by chemical precipitation method using KI, K₂HPO₄ and AgNO₃ in the presence of MWCNTs. Its structure and physical properties were characterized by means of scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscope (TEM), X-ray diffraction (XRD), UV–vis absorption spectra, X-ray photo-electron spectroscopy (XPS), photoluminescence spectra (PL) and photocurrent techniques. SEM, TEM and EDS analyses verified that AgI–Ag₃PO₄ is successfully loaded on MWCNTs. AgI–Ag₃PO₄/MWCNTs possess the absorption edge of red shift and small band gap energy, and could absorb more photons in the visible region. PL and photocurrent analyses illustrated that AgI–Ag₃PO₄/MWCNTs have the lowest emission peak intensity and the highest photoelectric current, compared with Ag₃PO₄, AgI and AgI–Ag₃PO₄. By using the photocatalytic degradation of mixed dyes wastewater of Orange II and ponceau 4R as a model reaction, the photocatalytic efficiencies of Ag₃PO₄, AgI, AgI–Ag₃PO₄ and AgI–Ag₃PO₄/MWCNTs were evaluated. The reaction results showed that AgI–Ag₃PO₄/MWCNTs have strong photocatalytic activity and excellent chemical stability in repeated and long-term applications. Therefore, the prepared AgI–Ag₃PO₄/MWCNTs could act as a high-performance catalyst for the photocatalytic degradation of mixed dyes wastewater and also suggested the promising applications.     

Cobalt ferrite nanoparticles prepared by microwave hydrothermal synthesis and adsorption efficiency for organic dyes: Isotherms,thermodynamics and kinetic studies

Magnetic nanoferrites (MFe₂O₄, M = Co, Ni) were successfully synthesised through microwave-hydrothermal route, characterised and used for adsorption of Eriochrome Black T (EBT) and Bromophenol Blue (BRB) dyes from their aqueous solution. The powder XRD patterns confirmed the formation of cubic spinel structure for both the ferrites. Under identical conditions, the adsorption efficiency of CoFe₂O₄ was found relatively higher than the corresponding NiFe₂O_4. Further characterisations revealed that CoFe₂O₄ sample was nearly spherical in size (8–9 nm) with narrow size distribution. The sample showed superparamagnetic behaviour with saturation magnetization (M_s) value (66.4 emu/g). BET surface area calculated for the synthesized cobalt ferrite as 70.9 m²/g. Batch adsorption experiments as a function of initial dye concentration, pH, contact time and adsorbent dose showed the adsorption of dyes depends on pH. Equilibrium adsorption data were well explained by both Langmuir and Freundlich isotherm models. The maximum monolayer adsorption capacities (Q_o) were found to be 82.6 and 25.6 mg/g for EBT and BRB dyes, respectively. Kinetics of the adsorption was best described by pseudo-second-order model. Various thermodynamic parameters such as ΔG, ΔH and ΔS derived from adsorption data over the temperature range 20–50 °C, accounted for a favourable, spontaneous, endothermic physisorption process. The materials showed potential for repeated use without significant decrease in adsorption capacity after proper regeneration.     

Performance of near-infrared dyes as effective contrast agents for breast cancer detection through simulation of photoacoustic imaging

ABSTRACT

Targeted photoacoustic imaging using exogenous contrast agents can potentially improve early detection of breast cancer, even at significant depths inside the breast. In this study, computer simulations were performed to compare the photoacoustic performance of 11 different near-infrared (NIR) dyes for detecting tumours deep inside the breast tissue. It was observed that the three high performing NIR dyes produced at least two-fold contrast enhancement of a spherical breast tumour embedded at 4?cm depth inside the breast than those of the corresponding endogenous contrast agents. These three selected dyes were employed to visualize small blood vessels deep inside the breast tissue. Although methylene blue provided the best contrast in visualizing tumour blood vessels at depths beyond 3?cm, considering other factors such as availability of suitable targeting agent, indocyanine green at 800?nm may be preferred over all other dyes for deep breast imaging applications.     

Squaraine Dyes for Photovoltaic and Biomedical Applications

Squaraine dyes (SQs) are an important class of polymethine dyes with a unique reasonable-stabilized zwitterionic structure, in which electrons are highly delocalized over the conjugated bridge. These dyes can not only be easily synthesized via a condensation, but also exhibit intense absorption and emission in the visible and near-infrared region with excellent photochemical stability, making them attractive material candidates for many photoelectric and biomedical applications. Thus, in this review, after an introduction of SQs, the recent advances of SQs in the photovoltaic field are comprehensively summarized including dye-sensitized solar cells, organic solar cells, and perovskite solar cells. Then, the important advances in the use of SQs as the biosensors, biological imaging, and photodynamic/photothermal therapy reagents in the biomedical field are also discussed. Finally, a summary and outlook will be provided with some new perspectives for the future design of SQs.